Hydration of CO adsorbed on Pt(100) at cryogenic temperatures in UHV environments

Adsorption of small amounts of D(2)O (ca. 0.01 L exposure) on CO(sat)/Pt(100) surfaces in ultrahigh vacuum at 105 K was found to split the asymmetric peak at 2100 cm(-1) in the infrared reflection absorption spectra attributed to the stretching of CO adsorbed on atop sites into two clearly defined features: an intense component, which shifted toward lower energies due to surface hydration of adsorbed CO (originally at 2100 cm(-1), peak a), and a smaller peak centered at 2094 cm(-1) (peak b), which remained fixed in position even after closing the D(2)O dosing valve. The energies of peaks a and b, as determined by statistical analyses, correlated very well with those reported in the literature for CO adsorbed at high coverages on Pt(100) originally in the (5 x 20) or (hex) reconstruction, and on the unreconstructed Pt(100)-(1 x 1), respectively, at 90 K. On these bases, the asymmetry of the peak observed for CO(sat)/Pt(100) (no D(2)O dosing) is ascribed to the presence of CO linearly adsorbed on these two different sites on the surface, for which the rate of hydration is larger for the (5 x 20) compared to the (1 x 1) phases.     

SKH-1 hairless mice repair UV-induced pyrimidine dimers in epidermal DNA

The SKH-1 hairless mouse strain has been used extensively as a model for human photocarcinogenesis, photoimmunology and photoaging, but little is known about DNA repair in living mouse skin. Mice were irradiated with UV-B light at doses which produce mild to severe sunburn, and the frequency of pyrimidine dimers in epidermal DNA was measured immediately and 6 h after irradiation using T4 endonuclease V treatment and alkaline agarose gel electrophoresis. The results demonstrate significant removal of pyrimidine dimers in mouse skin in vivo, with a dimer half-life of 7.4 h. These findings are similar to the repair of dimers in human skin in vivo. The SKH-1 hairless mouse is thus a useful model for pyrimidine dimer repair in human skin.     

Surface dynamics of coadsorbed CO and D2O on Pt(100) in ultrahigh vacuum as studied by time-resolved infrared reflection absorption spectroscopy

Changes in the properties of CO adsorbed at saturation coverages on Pt(100) induced by subsequent coadsorption of fixed amounts of D2O at 105 K in ultrahigh vacuum (UHV) were monitored by time-resolved infrared reflection absorption spectroscopy (tr-IRAS). The linear- and bridge-bonded CO stretching features were found to change in intensity and shift toward lower energies as a function of time at fixed CO and D2O coverages. Also observed was the development of multiple features in both CO spectral regions depending on the amount of D2O on the surface. These findings indicate that, under the conditions of these experiments, the interfacial dynamics are relatively slow, on the order of minutes, involving a gradual rearrangement of adsorbed CO and D2O on the surface to yield surface solvated CO, as has been suggested in the literature (Kizhakevariam et al. J. Chem. Phys. 1994, 100, 6750). This factor should be considered when comparing, quantitatively, shifts induced by water coadsorption with CO on Pt single crystals in UHV with CO adsorption on the same surfaces in electrochemical environments.     

Single-molecule magnets constructed from cyanometalates: {[Tp*Fe(III)(CN)3M(II)(DMF)4]2[OTf]2} x 2DMF (M(II) = Co, Ni)

Treatment of several divalent transition-metal trifluoromethanesulfonates [M(II)(OTf)2; M(II) = Mn, Co, Ni] with [NEt4][Tp*Fe(III)(CN)3] [Tp* = hydridotris(3,5-dimethylpyrazol-1-yl)borate] in DMF affords three isostructural rectangular clusters of {[Tp*Fe(III)(CN)3M(II)(DMF)4]2[OTf]2} x 2DMF (M(II) = Mn, 3; Co, 4; Ni, 5) stoichiometry. Magnetic studies of 3-5 indicate that the Tp*Fe(CN)3(-) centers are highly anisotropic and exhibit antiferromagnetic (3 and 4) and ferromagnetic (5) exchange to afford S = 4, 2, and 3 spin ground states, respectively. ac susceptibility measurements suggest that 4 and 5 exhibit incipient single-molecule magnetic behavior below 2 K.     

Native agarose gel electrophoresis and electroelution: A fast and cost‐effective method to separate the small and large hepatitis B capsids

Hepatitis B core antigen (HBcAg) expressed in Escherichia coli is able to self‐assemble into large and small capsids comprising 240 (triangulation number T = 4) and 180 (triangulation number T = 3) subunits, respectively. Conventionally, sucrose density gradient ultracentrifugation and SEC have been used to separate these capsids. However, good separation of the large and small particles with these methods is never achieved. In the present study, we employed a simple, fast, and cost‐effective method to separate the T = 3 and T = 4 HBcAg capsids by using native agarose gel electrophoresis followed by an electroelution method (NAGE‐EE). This is a direct, fast, and economic method for isolating the large and small HBcAg particles homogenously based on the hydrodynamic radius of the spherical particles. Dynamic light scattering analysis demonstrated that the T = 3 and T = 4 HBcAg capsids prepared using the NAGE‐EE method are monodisperse with polydispersity values of ～15% and ～13%, respectively. ELISA proved that the antigenicity of the capsids was not affected in the purification process. Overall, NAGE‐EE produced T = 3 and T = 4 capsids with a purity above 90%, and the recovery was 34% and 50%, respectively (total recovery of HBcAg is ～84%), and the operation time is 15 and 4 times lesser than that of the sucrose density gradient ultracentrifugation and SEC, respectively.     

Regioselective Synthesis of Polycyclic and Heptagon-embedded Aromatic Compounds through a Versatile π-Extension of Aryl Halides

A versatile π-extension reaction was developed based on the three-component cross-coupling of aryl halides, 2-haloarylcarboxylic acids, and norbornadiene. The transformation is driven by the direction and subsequent decarboxylation of the carboxyl group, while norbornadiene serves as an ortho-C−H activator and ethylene synthon via a retro-Diels–Alder reaction. Comprehensive DFT calculations were performed to account for the catalytic intermediates.     

Bioprinting of Collagen: Considerations,Potentials, and Applications

Collagen is the most abundant extracellular matrix protein that is widely used in tissue engineering (TE). There is little research done on printing pure collagen. To understand the bottlenecks in printing pure collagen, it is imperative to understand collagen from a bottom‐up approach. Here it is aimed to provide a comprehensive overview of collagen printing, where collagen assembly in vivo and the various sources of collagen available for TE application are first understood. Next, the current printing technologies and strategy for printing collagen‐based materials are highlighted. Considerations and key challenges faced in collagen printing are identified. Finally, the key research areas that would enhance the functionality of printed collagen are presented.     

Overview of finite elements simulation of temperature profile to estimate properties of materials 3D-printed by laser powder-bed fusion

Laser powder bed fusion(LPBF),like many other additive manufacturing techniques,offers flexibility in design expected to become a disruption to the manufacturing industry.The current cost of LPBF process does not favor a try-anderror way of research,which makes modelling and simulation a field of superior importance in that area of engineering.In this work,various methods used to overcome challenges in modeling at different levels of approximation of LPBF process are reviewed.Recent efforts made towards a reliable and computationally effective model to simulate LPBF process using finite element(FE)codes are presented.A combination of ray-tracing technique,the solution of the radiation transfer equation and absorption measurements has been used to establish an analytical equation,which gives a more accurate approximation of laser energy deposition in powder-substrate configuration.When this new analytical energy deposition model is used in in FE simulation,with other physics carefully set,it enables us to get reliable cooling curves and melt track morphology that agree well with experimental observations.The use of more computationally effective approximation,without explicit topological changes,allows to simulate wider geometries and longer scanning time leading to many applications in real engineering world.Different applications are herein presented including:prediction of printing quality through the simulated overlapping of consecutive melt tracks,simulation of LPBF of a mixture of materials and estimation of martensite inclusion in printed steel.     

Air‐Stable Spirofluorene‐Containing Ladder‐Type Bis(alkynyl)borane Compounds with Readily Tunable Full Color Emission Properties

A series of air‐stable spiro‐fused ladder‐type boron(III) compounds has been designed, synthesized, and the electrochemistry and photophysical behavior have been characterized. By simply varying the substituents on the pyridine ring and extending the π‐conjugation of the spiro framework, the emission color of these compounds can be easily fine‐tuned spanning the visible spectrum from blue to red. All compounds exhibit a broad and structureless emission band across the entire visible region, assigned as an intramolecular charge‐transfer transition originating from the thiophene of the spiro framework to the pyridine‐borane moieties. In addition, these compounds demonstrate high photoluminescence quantum yields of up to 0.81 in dichloromethane solution and 0.86 in doped thin films. Some of the compounds have also been employed as emissive materials, in which solution‐processed organic light‐emitting devices (OLEDs) with tunable emission colors spanning the visible spectrum from blue, green to red have been realized, demonstrating the potential applications of these boron compounds in OLEDs.     

Assessment of high-resolution methods for numerical simulations of compressible turbulence with shock waves

Flows in which shock waves and turbulence are present and interact dynamically occur in a wide range of applications, including inertial confinement fusion, supernovae explosion, and scramjet propulsion. Accurate simulations of such problems are challenging because of the contradictory requirements of numerical methods used to simulate turbulence, which must minimize any numerical dissipation that would otherwise overwhelm the small scales, and shock-capturing schemes, which introduce numerical dissipation to stabilize the solution. The objective of the present work is to evaluate the performance of several numerical methods capable of simultaneously handling turbulence and shock waves. A comprehensive range of high-resolution methods (WENO, hybrid WENO/central difference, artificial diffusivity, adaptive characteristic-based filter, and shock fitting) and suite of test cases (Taylor–Green vortex, Shu–Osher problem, shock-vorticity/entropy wave interaction, Noh problem, compressible isotropic turbulence) relevant to problems with shocks and turbulence are considered. The results indicate that the WENO methods provide sharp shock profiles, but overwhelm the physical dissipation. The hybrid method is minimally dissipative and leads to sharp shocks and well-resolved broadband turbulence, but relies on an appropriate shock sensor. Artificial diffusivity methods in which the artificial bulk viscosity is based on the magnitude of the strain-rate tensor resolve vortical structures well but damp dilatational modes in compressible turbulence; dilatation-based artificial bulk viscosity methods significantly improve this behavior. For well-defined shocks, the shock fitting approach yields good results.